VALIDATED

Check out verified compatible printers!

  • COLFEED Tested Products

    • FEco, 15 TiO2
    • FOss, 20 HA

  • Tested Printers

    • PRi 3
    • PRi 5
    • TiTÁN 500

  • Extruder Model

    • Direct extrusion, with double wheel adjustable in all the force range. It is fed by Teflon cannula (PTFE) in the case of the TiTAN 500 with double extrusion motor and filament sensor. The heating block of all of them is made of aluminum with brass nozzles. Some head parts are printed in polymer. The heating bed is removable, made of glass with a PEI coating to improve adhesion.
    • Own design heads

  • COLFEED Tested Products

  • All filaments in catalogue
  • Tested Printers

  • Prusa MK3S+ Printer

  • Extruder Model

    • DBondTech head and E3D-V6 fuser. Made of a heating block of aluminum with brass nozzles. The magnetic heating bed is removable with a PEI coating to improve adhesion.

  • Printing Conditions

  • Printing Temp: 155-170ºC
    Hot Pad: 30-60ºC
    Printing Speed: 20 -50mm/s
    Minimum layer height: 0.2 mm
  • COLFEED Tested Products

    • FILAMENT-Eco, 25% Carbon
    • GRANULES-Eco, 30% Carbon
    • FILAMENT-Eco, 15% TiO2
    • GRANULES-Eco, 10% ZnO
    • FILAMENT-Cer, Al2O3

  • Tested Printers

    • Tumaker NX Pro Direct Drive
    • Tumaker NX ProPellets
    • Tumaker Pro dual Direct Drive – Pellets

  • Extruder Model

    • Direct extrusion, with double wheel adjustable through all the force range. The heating block is made of aluminum with stainless steel nozzles. The heating bed is removable, made of glass with a PEI coating to improve adhesion.
    • Pellet extruder with 2 temperature control zones. Nozzle diameter: 0.4mm, 0.6mm and 1mm.(Both self-developed heads)

  • COLFEED Tested Products

  • FILAMENT-Oss 20 HA filament

  • Tested Printers

    • 3D REG4Life (R4L) Bioprinter

  • Extruder Model

    • Direct extrusion with double wheel adjustable through all the force range
    • Extruder Nozzle 0.40 mm

  • Printing Conditions

    • Printing Temp: 220ºC
    • Hot Pad: 60ºC
    • Printing Speed: 30mm/s
    • Layer Height: 0.25 mm

  • COLFEED Tested Products

  • FILAMENT-Oss 10 Mg

  • Tested Printers

    • Makerbot Method

  • Extruder Model

    • Makerbot LABS extruder
    • Direct extrusión with extra-long, one-piece nozzle for better extrusion and shrinkage control

  • Printing Conditions

    • Printing Temp: 160ºC
    • Hot Pad: 60ºC
    • Printing Speed: 30mm/s
    • Layer height: 0.20 mm

  • COLFEED Tested Products

  • FILAMENT-Oss, 20 HA

  • Tested Printers

    • Ultimaker S5

  • Extruder Model

    • Direct extrusion, with double wheel adjustable throughout the force range. Filament sensor before entering the chamber. Extruder for 2.85mm threads.
    • Own design heads

  • COLFEED Tested Products

  • FILAMENT-Eco, 20 Carbon

  • Tested Printers

    • DT60 industrial printer

  • Extruder Model

    • Direct extrusion.
    • Dyze PRO Extruder
    • 0.4mm nozzle
      • Printing volume 600x450x450mm
      • Chamber heated up to 120°C
      • Automatic filament exchange
      • Hotend temperature up to 500 °C
    • (More features in this link)

  • Manufacturer's Recommendations

    • Hot-end temperature: 200°C
    • Chamber temperature: 40°C
    • Printing speed 50mm/s
    • Dehumidify filament
    • Filament loading completely vertical to the extruder to avoid shear stresses that can damage or break it