SHOP

Name: GEco Carbon
SKU: 2426
Availability: InStock

GEco Carbon

Price range: 160,00€ through 165,00€ VAT not included

Quantity: 45 gr (Equivalent to 10 meters of filament Ø=1,75 mm)

Short description: GRANULE-Eco Carbon is a composite material of conductive graphite particles dispersed in a PLA matrix. Granules with 25 vol.% graphite provide conductivity in the printed parts of up to as 13 S m ^-1 (depending on the printing conditions).

Format: Plastic Jar

Granule & Printing: Granule size & flow match the printing conditions of hot-ends with pellets’ reservoir- Printing Temperature 150 -160ºC

*Tested on validated printers with a direct drive extruder and a top mount.

Particle: Graphite Mean Diameter 23 µm – Inorganic Content up to 25 vol.%.

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Printing Guidelines

If you have a special request or need a personalized granule, please contact us!

SKU: N/A Category: Our Granules

Share on:

Description

Advantages: The colloidal approach used to prepare the feedstock allows to obtain a high dispersion degree of carbon particles into the polymer matrix. The graphite used has distinctive properties, so it can be used as an electrode substrate.

Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC- 30ºC

Granule Characteristics
Material: Graphite
Composition: Up to 25 vol. %
Glass Transition Temp. (Tg): 54 ºC
Melting Temp: 154 ºC

Printing Recommendations
Printing Temp: 150 – 160 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 50 mm/s
Layer Height: > 0.2 mm

Particle Properties
Particle: Graphite
Size (Dv50): 23 µm
Density: 2.23 g/cm³
Spec Surf. Area: 4.82 m²/g