Granules FOss HASint

240,00 VAT not included

Quantity: 55 gr (Equivalent to 10 meter of  filament Ø=1,75 mm)

Advantages: GRANULES-FOss HASint can be sintered in the same way as if it were hydroxyapatite. Furthermore, it remains easily printable by FFF heating heads with pellets reservoir without clogging problems. GRANULES-FOss HASint is specifically formulated to allow 100% inorganic parts to be obtained through 3D printing, allowing easy manufacturing of bone-inducing scaffolds with custom shapes.


Short description: GRANULES-FOss HASint is an easily printable filament with a high content of hydroxyapatite particles. After printing your desired shape, the sintering process provides you a 100% hydroxyapatite piece or scaffold.

Format: Plastic jar

Granule & Printing: Granule diameter & fluency match the printing conditions of hot-ends with pellets’ reservoir – Printing Temperature 155-165ºC

Particle: Hydroxyapatite Mean Diameter 3 µm – Inorganic Content: 50 vol.%.


If you have a special request or need a personalized granule, please contact us!


Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC- 30ºC


Granules Characteristics
Material: Hydroxyapatite
Composition: 50 vol.%


Physical Propierties
Glass Transition Temp. (Tg): 60 ºC
Melting Temp: 150 ºC
Sintering Temp.: 1250ºC

Printing Recommendations
Printing Temp: 155 – 165 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 30 – 100 mm/s
Layer Height > 0.2 mm


Particle Properties
Particle: Hydroxyapatite (Ca:P 1.67:1)
Size (Dv50): 3 µm
Density: 3.17 g/cm³
Spec Surf. Area: 1.5 m²/g