SHOP

Name: FOss Mg (1,75mm/10m)
SKU: 1942
Availability: InStock

FOss Mg (1,75mm/10m)

Price range: 140,00€ through 160,00€ VAT not included

Price: €/10m

Linear Density: 3.1 g/m

Short description: FILAMENT-Oss Mg is a composite material made of osseoinductive Mg particles supported by a biodegradable polymer matrix for bone regeneration.

Filament & Printing: Filament Diameter 1.75 (±0.15 mm) – Printing Temperature 160ºC

*Tested on validated printers with a direct drive extruder and a top mount.

Particle: Magnesium Mean Diameter 29 µm – Inorganic Content up to 15 vol.%.

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Printing Guidelines

If you have a special request or need a personalized filament, please contact us!

SKU: N/A Categories: FILAMENT-Oss, Our Filaments

Share on:

Description

Advantages: FILAMENT-Oss is bioabsorbable, can be sterilized by ultraviolet light, has antibacterial effect and allows obtaining multidirectional and customized porosity.

Applications: FILAMENT-Oss has in vitro validated biodegradation and bioactivity, good adhesion and cell growth making it suitable for in vitro/in vivo studies..

Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC- 30ºC

Filament Characteristics
Material: Magnesium
Composition: Up to 15 vol. % (20 wt.%).
Diameter: 1.75 mm (±0.15 mm)
Linear Density: 3.0 – 3.1 g/m
Format: Vacuum-packed spool

Physical Propierties
Glass Transition Temp.: (Tg): 58 ºC
Melting Temp.: 150 ºC
Degradation Temp.: 320 ºC

Printing Recommendations
Printing Temp.: 155 -165 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 10 – 60 mm/s
Layer Height: > 0.15 mm
Nozzle Diameter: > 0.4 mm
Head travel speed: < 1500 mm/s
Stand-by Temp.: < 140 ºC

Particle Properties
Particle: Magnesium (Mg 98.8%)
Size (Dv50): 46 µm
Density: 1.74 g/cm³
Spec Surf. Area: <0.33 m²/g

Bibliography

Ferrández-Montero, A., Lieblich, M., Benavente, R., González-Carrasco, J., & Ferrari, B. (2020). Study of the matrix-filler interface in PLA/Mg composites manufactured by Material Extrusion using a colloidal feedstock. Additive Manufacturing, 33, 101142. https://doi.org/10.1016/j.addma.2020.101142

Orellana-Barrasa, J.; Ferrández-Montero, A.; Boccaccini, A.R.; Ferrari, B.; Pastor, J.Y. The Mechanical, Thermal, and Chemical Properties of PLA-Mg Filaments Produced via a Colloidal Route for Fused-Filament Fabrication. Polymers 2022, 14, 5414. https://doi.org/10.3390/polym14245414