SHOP

Name: FOss HASint (1,75mm/10m)
SKU: 1900
Price: 240.00 EUR
Availability: InStock

FOss HASint (1,75mm/10m)

240,00€ VAT not included

Price: €/10m

Linear Density: 5.3 g/m

Short description: FILAMENT-Oss HASint is an easily printable filament with a high content of hydroxyapatite particles. After printing your desired shape, the sintering process provides you a 100% hydroxyapatite piece or scaffold.

Filament & Printing: Filament Diameter 1.75 mm (±0.15 mm) – Printing Temperature 140-165ºC

*Tested on validated printers with a direct drive extruder and a top mount.

Particle: Hydroxyapatite Mean Diameter 3 µm – Inorganic Content: 50 vol.% (72wt.%).

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Printing Guidelines

Sintering Example

If you have a special request or need a personalized filament, please contact us!

Categories: FILAMENT-Oss, Our Filaments

Share on:

Description

Advantages: FILAMENT-Oss HASint can be sintered in the same way as if it were hydroxyapatite. Furthermore, it remains easily printable by FFF, without clogging problems.

Applications: FILAMENT-Oss HASint is speci-fically formulated to allow 100% inorganic parts to be obtained through 3D printing, allowing easy manufacturing of bone-inducing scaffolds with custom shapes.

Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC and 30ºC

Filament Characteristics
Material: Hydroxyapatite
Composition: 50 vol.% (72 wt.%)
Diameter: 1.75 mm (±0.15 mm)
Linear Density: 5.3 g/m
Format: Spool vacuum packed
Recommended Sintering Temp.: 1250ºC

Physical Propierties
Glass Transition Temp. (Tg): 55 ºC
Melting Temp: 156 ºC
Degradation Temp. 320 °C

Printing Recommendations
Printing Temp: 155 – 165 ºC
Hot Pad: 40 ºC
Printing Speed: 5 – 15 mm/s
Layer Height: ≥ 0.15 mm
Nozzle Diameter: ≥ 0.4 mm
Head travel speed: < 80 mm/s
Stand-by Temp.: < 30 ºC

Particle Properties
Particle: Hydroxyapatite (Ca:P 1.67:1)
Size (Dv50): 2.76 µm
Density: 2.19 g/cm³
Spec Surf. Area: 1.4 m²/g