SHOP
ImplantaOss® (Filament)
Price range: 200,00€ through 315,00€ VAT not included
Price: €/10m
Linear Density: 3.2 – 3.9 g/m
Short description: ImplantaOss® is a composite material made of bioactive hydroxyapatite particles supported by a biodegradable polymer matrix for bone regeneration.
Filament & Printing: Filament Diameter 1.75 (±0.15 mm) – Printing Temperature 155-165ÂşC
*Tested on validated printers with a direct drive extruder and a top mount.
Particle: Hydroxyapatite Mean Diameter 3 µm – Inorganic Content up to 20 vol.%.
If you have a special request or need a personalized filament, please contact us!
Description
Advantages: ImplantaOss® is bioabsorbable, can be sterilized by ultraviolet light and allows obtaining multidirectional and customized porosity. ImplantaOss® is also ISO-certified as biocompatible (ISO-10995 ) and as a ready for its use as feedstock for medical devices (ISO-13485).
Applications: ImplantaOss® has in vitro validated biodegradation and bioactivity, good adhesion and cell growth making it suitable for in vitro/in vivo studies.
Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ÂşC and 30ÂşC
Filament Characteristics
Material: Hydroxyapatite
Composition: Up to 20 vol.% (40wt.%)
Diameter: 1.75 mm (±0.15 mm)
Density: 1.63 g/cmÂł
Linear Density: 3.2 – 3.9 g/m
Format: Vacuum-packed spool
Physical Propierties
Glass Transition Temp. (Tg): 62 ÂşC
Melting Temp: 156 ÂşC
Degradation Temp. 320 ÂşC
Printing Recommendations
Printing Temp: 155 – 165 ÂşC
Hot Pad: 40 ÂşC
Printing Speed: 10 – 60 mm/s
Layer Height ≥ 0.15 mm
Nozzle Diameter ≥ 0.4 mm
Particle Properties
Particle: Hydroxyapatite (Ca:P 1.74:1)
Size (Dv50): 2.76 µm
Density: 3.16 g/cmÂł
Spec Surf. Area: 1.40 m²/g
Bibliography
Ferrández-Montero A., Ortega-Columbrans P., Eguiluz A., Sanchez-Herencia A.J., Detsch R., Boccaccini A.R., Ferrari B. Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds. Polymer Composites 45, 8, 7237 – 7255. DOI https://doi.org/10.1002/pc.28263
Shan, E.; Chamorro, C.; Ferrández-Montero, A.; Martin-Rodriguez, R.M.; Ferrari, B.; Sanchez-Herencia, A.J.; Virto, L.; MarĂn, M.J.;Figuero, E.; Sanz, M. In Vitro Biological Properties Assessment of 3D-Printed Hydroxyapatite–Polylactic Acid Scaffolds Intended for Bone Regeneration. J. Funct. Biomater. 2025, 16, 218. https://doi.org/10.3390/jfb16060218
Sofokleous P., Paz E. and Herraiz-MartĂnez F. J. Design and Manufacturing of Dielectric Resonators via 3D Printing of Composite Polymer/Ceramic Filaments. Polymers 2024, 16(18), 2589; DOI https://doi.org/10.3390/polym16182589
You may also like…
This product has multiple variants. The options may be chosen on the product page FOss Mg (1,75mm/10m)
Price range: 140,00€ through 160,00€ VAT not included-
FCer ZrO2 (1,75mm/10m)
330,00€ VAT not included - This product has multiple variants. The options may be chosen on the product page
FEco Graphene (1,75mm/10m)
Price range: 210,00€ through 250,00€ VAT not included - This product has multiple variants. The options may be chosen on the product page
ImplantaOss® (Filament)
Price range: 200,00€ through 315,00€ VAT not included
Related products
- This product has multiple variants. The options may be chosen on the product page
FEco Carbon (1,75mm/10m)
Price range: 160,00€ through 165,00€ VAT not included -
FOss HASint (1,75mm/10m)
240,00€ VAT not included -
Ask for your filament!
0,00€ VAT not included - This product has multiple variants. The options may be chosen on the product page
FEco ZnO (1,75mm/10m)
Price range: 180,00€ through 185,00€ VAT not included
