160,00€ VAT not included
Linear Density: 3.3-3.9 g/m
Short description: FILAMENT-Eco TiO2 is a composite material of PLA and titanium dioxide nanoparticles with a large specific surface area and high content of anatase phase. Filaments with 15 vol.% TiO 2 have a kinetics constant of 6.57 10 -2 h -1 (3ppm NM).
Filament & Printing: Filament Diameter 1.75 mm (±0.15 mm) – Printing Temperature 160-170ºC
Particle: Titanium Dioxide AEROXIDE® TiO2- P 25 Mean Diameter 100 nm – Inorganic Content up to 15 vol.%.
If you have a special request or need a personalized filament, please contact us!
Advantages: The colloidal approach used to prepare the feedstock allows to obtain higher homogeneity in the dispersion of TiO2 nanoparticles into the polymer matrix.
Applications: The product is suitable for many catalytic and photocatalytic applications. Its structure also makes it suitable for use as an effective filter.
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC and 30ºC
Material: Titanium dioxide
Composition: Up to 15 vol. % (36 wt.%)
Diameter: 1.75 mm (±0.15 mm)
Linear Density: 3.3 – 3.9 g/m
Format: Spool vacuum packed
Glass Transition Temp. (Tg): 53 ºC
Melting Temp: 150 ºC
Printing Temp: 160 – 170 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 20 – 50 mm/s
Layer Height: > 0.2 mm
Nozzle Diameter: ≥ 0.4 mm
Head travel speed: < 150 mm/s
Stand-by Temp.: 30 ºC lower than the used printing temperature or <140 ºC
Particle: Titanium Dioxide AEROXIDE® TiO2- P 25
Size (Dv50): 90 nm
Density: 3.87 g/cm³
Spec Surf. Area: 52.3 m²/g
Crystallography: Anatase:Rutile 80:20