FEco Carbon (1,75mm/10m)

160,00165,00 VAT not included

Price: €/10m

Linear Density: 4-4.2 g/m

Short description: FILAMENT-Eco Carbon is a composite material of conductive graphite particles dispersed in a PLA matrix. Filaments with 25 vol.% Graphite have a conductivity of 11 S m -1 .

Filament & Printing: Filament Diameter 1.75 mm (±0.15 mm) – Printing Temperature 155 -165ºC

Particle: Graphite Mean Diameter 23 µm – Inorganic Content up to 25 vol.%.

Technical Data Sheet (TDS)


If you have a special request or need a personalized filament, please contact us!

SKU: N/A Categories: ,

Advantages: The colloidal approach used to prepare the feedstock allow obtaining high dispersion degree of carbon particles into the polymer matrix.

Applications: This filament is ideal for applications where a reinforced material is needed. In addition, the graphite used has properties that are distinctive, so it can be used as an electrode substrate, structural health monitoring.


Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC and 30ºC


Filament Characteristics
Material: Graphite
Composition: Up to 25 vol. % (39wt.%)
Diameter: 1.75 mm (±0.15 mm)
Linear Density: 3.6 g/cm
Format: Spool vacuum packed


Physical Propierties
Glass Transition Temp. (Tg): 58 ºC
Melting Temp: 154 ºC
Degradation Temp.: 298ºC


Printing Recommendations
Printing Temp: 155 – 165 ºC
Hot Pad: 50 – 60 ºC
Printing Speed: 10-60 mm/s
Layer Height: > 0.15 mm
Nozzle Diameter: > 0.4 mm
Head travel speed: < 150 mm/s


Particle Properties
Particle: Graphite
Size (Dv50): 23 µm
Density: 2.31 g/cm³
Spec Surf. Area: 4.82 m²/g