FCer Al2O3 (1,75mm/10m)

280,00 VAT not included

Price: €/10m

Linear Density: 5.9 g/m

Short description: FILAMENT-Cer Al2O3 is an easily printable filament with a high content of alumina nanoparticles. After printing your desired shape, the sintering process provides you a 100% alumina piece or scaffold.

Filament & Printing: Filament Diameter 1.75 mm (±0.15 mm) – Printing Temperature 158 -175ºC

Particle: Alumina Mean Diameter 840 nm – Inorganic Content: 44 vol.%.


If you have a special request or need a personalized filament, please contact us!


Advantages: FILAMENT-Cer Al2O3 can be sintered in the same way as if it were alumina.It remains easily printable by FFF, without clogging problems.

Applications:FILAMENT-Cer Al2O3 is specifically formulated to allow 100% inorganic parts to be obtained through 3D printing, allowing easy manufacturing of bone-inducing scaffolds with custom shapes.


Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC- 30ºC


Filament Characteristics
Material: Aluminum Oxide
Composition: 44 vol. %
Diameter: 1.75 mm (±0.15 mm)
Linear Density: 5.9 g/cm
Format: 40 cm bar
Sintering Temp.: >98.5% after 1500ºC


Physical Propierties
Glass Transition Temp. (Tg): 53 ºC
Melting Temp: 152 ºC


Printing Recommendations
Printing Temp: 158 – 175 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 20 mm/s
Layer Height > 0.2 mm


Particle Properties
Particle: Al2O3
Size (Dv50): 840 nm
Density: 3.97 g/cm³
Spec Surf. Area: 7.81 m²/g