Granules FCer Al2O3

280,00 VAT not included

Quantity: 60 gr (Equivalent to 10 meter of  filament Ø=1,75 mm)

 

Short description: GRANULES-FCer Al2O3 is an easily printable feedstock with a high content of alumina nanoparticles. After printing your desired shape, the sintering process provides you a 100% alumina piece or scaffold.

Format: Plastic jar

Granule & Printing: Granule diameter & fluency match the printing conditions of hot-ends with pellets’ reservoir – Printing Temperature 158 -175ºC

Particle: Alumina Mean Diameter 840 nm – Inorganic Content: 44 vol.%.

 

If you have a special request or need a personalized granule, please contact us!

Category:
Description

Advantages: GRANULES-FCer Al2O3 can be sintered in the same way as if it were alumina.It remains easily printable by FFF, without clogging problems. GRANULES-FCer Al2O3 is specifically formulated to allow 100% inorganic parts to be obtained through 3D printing, allowing easy manufacturing pieces with custom shapes.

 

Storage Conditions
-Keep in a dry place
-Protect from direct sunlight
-Storage between 5ºC- 30ºC

 

Granules Characteristics

Material: Aluminium Oxide
Composition: 44 vol. %

 

Physical Propierties
Glass Transition Temp. (Tg): 53 ºC
Melting Temp: 152 ºC
Sintering Temp.: >98.5% after 1500ºC

 

Printing Recommendations
Printing Temp: 158 – 175 ºC
Hot Pad: 30 – 60 ºC
Printing Speed: 20 mm/s
Layer Height > 0.2 mm

 

Particle Properties
Particle: Al2O3
Size (Dv50): 840 nm
Density: 3.97 g/cm³
Spec Surf. Area: 7.81 m²/g