Glaze and pigments for ceramic decoration with relief

Product Features


FILAMENT-Tile allows designing colored 3D decorations by printing glazes incorporating inorganic pigments


FILAMENT-Tile has 100% customized composition. The PLA – inorganic phase ratio can be varied according to the customers’ needs, achieving up to 40 vol.% of total inorganic phases



  • Decorate with volume
  • Develop personalized ceramic reliefs
  • Provide a wide range of styles, colors and effects


  • Compositions: up to 40 vol.% of inorganic charge (glazes and ceramic pigments)
  • Diameter: 1.75 mm (±0.05 mm)
  • Quantity: from 5 g to higher batches
  • Print Temperature: 150-170°C

Instructions for use:

  1. Insert the filament into the 3Dprinter
  2. Heat up at the reference temperature and drive motor to start the filament flow
  3. Once the printing is finished, keep the filament in a dry place and inside the bag

Storage Conditions: 

  • Keep in a dry place
  • Protec from the direct sunlight
  • Store between 5°C – 30°C