A bioactive material supported by a biodegradable polymer matrix for personalized bone regeneration.

Product Features


FILAMENT-Oss allows obtaining multidirectional and customized interconnected porous structure with a specific consistence


FILAMENT-Oss has 100% customized composition. The PLA – inorganic phase ratio can be varied according to the customers’ needs, achieving up to 45 vol.% of inorganic phase



  • Replace the pastes usually applied for bone regeneration
  • Has in vitro validated biodegradation and bioactivity
  • Has improved hydrophilic properties, i.e. it could be impregnated in the patient plasma prior to implantation
  • Can lead to 100% inorganic part after proper thermal treatment. 
  • Can be sterilized by UV-light


  • Compositions: up to 50 vol.% of inorganic charge (HA, β-TCP, Mg, Ti, etc.)
  • Diameter: 1.75 mm (±0.05 mm)
  • Quantity: from 5 g to higher batches
  • Print Temperature: 150-170°C


Instructions for use:

    1. Insert the filament into the 3Dprinter
    2. Heat up at the reference temperature and drive motor to start the filament flow
    3. Once the printing is finished, keep the filament in a dry place and inside the bag


Storage Conditions: 

  • Keep in a dry place
  • Protec from the direct sunlight
  • Store between 5°C – 30°C